Securing On Engine And Transmission Holder
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Holding Plate:VW309A
- Holding Fixture:VW313 or
- Engine and Transmission Holder:VW6095
- Transmission Support:VW353
- Holding Fixture:VW540
Attach Transmission Horizontally
-- Secure the transmission on the :VW540 -arrows-.
-- Install the transmission using the :VAS6100 in :VW313 or :VAS6095 .
WARNING:
There is a risk the transmission could swing around when it is turned on the :VW313 .
- Because center of gravity is located outside the holding fixture center of rotation, a second technician must hold the transmission housing to rotate.
CAUTION:
There is a risk of oil leaking when turning the transmission.
- Vents for the transmission housing must be closed before turning a filled transmission on the engine/transmission stand so that the oil pan faces upward.
Secure Transmission in Vertical Position
-- Mount the transmission to the :VW353 and insert the :VW309A in the :VW313 or the :VAS6095 .