Valve Stem Seals, Removing And Installing, Cylinder Head Removed: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Puller - Valve Seal:3364
- Seal Installer - Valve Stem:3365 for valve stem seal with a simple sealing lip. Refer to Figure.
- Seal Installer - Valve Stem:T40376/1 , for valve stem seal with a double sealing lip. Refer to the appropriate service information.(Figure)
- Valve Keeper Tool Kit:VAS 5161A
- Valve Keeper Tool Kit Pressure Fork with Lever for Assembly Cartridge:VAS5161/2
- Valve Cotter Tool Kit - Punch:VAS5161/3A
- Guide Forks M6/M8 with Threaded Studs:VAS5161/5
- Retainer:VAS5161/6
- Valve Cotter Tool Kit - Assembly Cartridge:VAS5161/8A
- Knurled Thumb Screws M6:VAS5161A/12
- Valve Cotter Tool Kit - Valve Insertion Device:VAS5161/18
- Valve Cotter Tool Kit - Guide Plate 19c:VAS5161/19C
- Engine and Transmission Holder:VAS6095A
- Cylinder Head Tensioning Device:VAS6419
- Mounting Sleeve. Refer to parts information