LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (LUBRICATION [4-Cylinder 2.0L 4V TFSI Engine] -- (A3 SEDAN)) >> 17 Lubrication >> Engine Oil Cooler >> Engine Oil Cooler, Removing And Installing >> Installing

Engine Oil Cooler, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Install the sub-assembly bracket. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals