EGR Cooler, Removing And Installing, Engine Codes CRFA, And CRFC: Installing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and Note The Following:

Replace the self-locking nuts and bolts, gaskets, seals and O-rings after removing.
Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts information.
During installation, install all cable ties back at the same position.

-- Install the catalytic converter. Refer to PARTICULATE FILTER, REMOVING AND INSTALLING .

-- Fill the coolant. Refer to COOLANT CIRCUIT FILLING AND BLEEDING: / COOLANT CIRCUIT FILLING AND BLEEDING [CRUA, DEJA] / COOLANT, FILLING (BLEEDING) [CNSB, CNTC] .