LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (COOLING SYSTEM (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine) -- (A3 SEDAN)) >> 19 Cooling System >> Radiator/Radiator Fan >> Auxiliary Radiator, Removing And Installing >> Installing

Auxiliary Radiator, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2016 Audi S3, 2016 Audi A3, and 2015 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts information.

-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals