Coolant Thermostat Housing, Removing And Installing: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Throttle Valve Control Module -J338-. Refer to Throttle Valve Control Module -J338-, REMOVING AND INSTALLING .

-- Remove the coolant pump. Refer to COOLANT PUMP, REMOVING AND INSTALLING .

-- Lift the clamps -1 and 2- and remove the coolant hoses.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connectors -1, 2 and 3- underneath the intake manifold.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- for the bracket -A-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the connector -arrow- from the After-Run Coolant Pump -V51- -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -3- and remove the After-Run Coolant Pump -V51- -1- from the bracket -2-.

-- Push the generator wire aside and remove the bolt -3- on the coolant thermostat housing.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the remaining bolts -1 through 5-.

-- Remove the coolant thermostat housing from the centering pins and remove the engine oil cooler.