LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (GENERAL, TECHNICAL DATA - [4-Cylinder 2.0L 4V TFSI Engine] -- (A3 SEDAN)) >> 00 General, Technical Data >> Repair Information >> Vacuum System, Checking >> Procedure

Vacuum System, Checking: Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Check all vacuum lines in the entire vacuum system for:

-- Check the vacuum line leading both to and from the solenoid valve to the respective component.

-- If there is a DTC memory entry, check the vacuum lines for the named component, but also check all the vacuum lines.

-- If using the Hand Vacuum Pump:VAS6213  does not produce any pressure or if the pressure drops again right away, then check the hand vacuum pump and the connection hoses for leaks.