Line Routing And Securing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Mark the individual fuel, hydraulic and vacuum lines, EVAP system as well as the wires before removing them. This will prevent interchanging them and will ensure the original installation position. Draw sketches or take pictures of them if required.
- Due to the limited space inside the engine compartment, allow sufficient clearance to all moving or hot parts to avoid damaging the lines.