Charge Air Cooler, Removing And Installing: Removing
WARNING: This page is about a different car, the 2017 Audi S3, 2016 Audi S3, 2016 Audi A3, 2015 Audi S3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the radiator. Refer to RADIATOR, REMOVING AND INSTALLING .
-- Loosen the clamps -1 and 2- and remove the air duct hose.
-- Seal the open lines and connections with clean plugs from the :VAS6122 .
-- Unlock the retaining tab and remove the cover -1- toward the front.
-- Unclip the left and right air duct -2- downward in direction of -arrow B-.
-- Open the left and right retainers in direction of -arrow A- and disengage the condenser -3- from the charge air cooler -1-.
-- Secure the condenser to the lock carrier.
-- Remove the charge air cooler.