Timing Chain Cover, Removing And Installing, Engine With Two Camshaft Adjusters: Removing

WARNING: This page is about a different car, the 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the model preliminary work may be required. Refer to TIMING CHAIN COVER [CNSB, CNTC, CYFB] .

-- Remove the camshaft adjustment valves. Refer to CAMSHAFT ADJUSTMENT VALVE 1 -N205-, REMOVING AND INSTALLING .

-- Free up the clip -2- for the wiring harness.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- Unclip the oil dipstick tube from the upper timing chain cover in direction of -arrow-.

-- Remove the bolts -1 through 6- and the upper timing chain cover.

Fig 1: Upper Timing Chain Cover Bolts Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- If necessary, remove the bolts -3 and 5-.