For Aluminum Bolts
WARNING: This page is about a different car, the 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Replace the bolts that were tightened with an additional turn after removing them.
| Step |
Bolts |
Tightening specification/additional turn |
| 1. |
-1 to 6- |
Install by hand all the way |
| 2. |
-1 to 6- |
4 Nm |
| 3. |
-1 to 6- |
180° additional turn |