Charge Air System, Checking For Leaks

Special tools and workshop equipment required 

• Turbo System Tester Kit: VAG1687 
  Fig 1: Identifying Turbo System Tester Kit

  Courtesy of AUDI OF AMERICA, LLC

Procedure 

-- Loosen the hose clamps -1 and 2- and remove the air duct pipe.

Fig 2: Identifying Clamps With Air Guide Pipe

Courtesy of AUDI OF AMERICA, LLC

-- Connect the : VAG1687/10  with the : VAG1687/14  to the turbocharger.

Fig 3: Identifying Turbocharger Testing Unit

Courtesy of AUDI OF AMERICA, LLC

-- Connect the : VAG1687  to the adapter.

All additional procedures are described. Refer to CHARGE AIR SYSTEM, CHECKING FOR LEAKS .

Tightening Specifications 

• Refer to OVERVIEW - CHARGE AIR HOSE CONNECTIONS .