LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> S3 Premium Plus >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger, Supercharger 2.0L (CNSB, CNTC, CYFB, DJJA) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING >> Installing

Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING: Installing

Install in reverse order of removal and note the following:

NOTE:

Replace the O-ring.

scientia non olet · About LEMON Manuals