LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> RS 7 Performance >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Cylinder Head & VALVETRAIN - Service Information - 4.0L - CEUC, CRDB, CTGE, CWUB, CWUC) >> Cylinder Head, VALVETRAIN >> Chain Drive >> Timing Mechanism Drive Chain, Removing And Installing >> Installing

Timing Mechanism Drive Chain, Removing And Installing: Installing

Install in reverse order of removal. Note the following: 

NOTE:

Replace any bolts that were tightened with an additional turn.

-- Position the timing mechanism drive chain according to the markings made on the drive chain sprockets during removal.

-- Install the guide rail and tighten the bolts -1-.

GWWA13-10362

-- Install the chain tensioner and tighten the bolts -2-.

-- Press the drive chain tensioner guide rail in direction of -arrow- and pull :T40071  out of the chain tensioner.

-- Install the power take-off drive chain. Refer to POWER TAKE-OFF DRIVE CHAIN, REMOVING AND INSTALLING .

-- Install the chain tensioner for camshaft timing chain. Refer to CAMSHAFT TIMING CHAIN TENSIONER, REMOVING AND INSTALLING .

-- Position the camshaft timing chain on the camshafts. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .

scientia non olet · About LEMON Manuals