LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> RS 7 Performance >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Cylinder Head & VALVETRAIN - Service Information - 4.0L - CEUC, CRDB, CTGE, CWUB, CWUC) >> Cylinder Head, VALVETRAIN >> Chain Drive >> Power Take-Off Drive Chain, Removing And Installing >> Installing

Power Take-Off Drive Chain, Removing And Installing: Installing

Install in reverse order of removal. Note the following: 

NOTE:

Replace the seal.

Replace any bolts that were tightened with an additional turn.

-- Install the timing chain cover lower section. Refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .