Camshaft Timing Chain TENSIONER, Removing And Installing: Installing
If the tensioning element was removed from the chain tensioner, then the installation position must be noted: Hole in housing floor faces toward chain tensioner, piston faces toward tensioning rail.
Replace any bolts that were tightened with an additional turn.
-- Press the tensioning rails for the left or right camshaft timing chain tensioner inward in direction of -arrow- as far as the stop and secure the chain tensioner with a :T40071 .
-- Insert the chain tensioner at the left cylinder head and install the camshaft timing chain as shown in the illustration.
-- Tighten the bolts -1 and 2-.
-- Insert the chain tensioner at the right cylinder head and install the camshaft timing chain as shown in the illustration.
-- Tighten the bolts -1 and 2-.
Installation is performed in reverse order of removal, while noting the following:
-- Position the camshaft timing chain on the camshafts. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .