LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> RS 7 Performance >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger System (Service Information - 4.0L - CEUC, CRDB, CTGE, CWUB, CWUC) >> Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor 2 -G447-, REMOVING AND INSTALLING >> Installing

Charge Air Pressure Sensor 2 -G447-, REMOVING AND INSTALLING: Installing

Install in reverse order of removal. Note the following:

NOTE:

Replace the seal and O-ring.

WARNING:

Fire hazards and risk of damage for a faulty engine cover.

  • The engine cover must be always be installed before the hood is closed.
  • The engine may neither be started nor driven without an engine cover.
scientia non olet · About LEMON Manuals