LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> RS 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (CYLINDER HEAD, VALVETRAIN (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Overview - Cylinder Head >> Cylinder Head - Tightening Specification And Sequence

Cylinder Head - Tightening Specification And Sequence

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
GWWA15-11305Courtesy of AUDI OF AMERICA, LLC

-- Replace the bolts.

-- Tighten the bolts in steps in the sequence shown:

Step Bolts Tightening Specification/Additional Turn
1. -1 through 10- 30 Nm
2. -1 through 10- 70 Nm
3. -1 through 10- 90° additional turn
4. -1 through 10- 90° additional turn
5. -1 through 10- 90° additional turn
scientia non olet · About LEMON Manuals