Transmission, Installing: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Transmission Support: 3282
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Subframe
- Bolts - Transmission
- Bolts - Drive Axle
- Bolts - Transmission Bracket
- Bolts - Driveshaft
- Bolts - Bevel Box
NOTE:
Replace the bolts that were tightened with an additional turn.
Replace the self-locking nuts and bolts, gaskets, seals and O-rings.
Secure all hose connections with hose clamps that match those used in production. Refer to the Parts information.
Bring all cable ties back to same positions during installation.