LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> RS 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (CONTROLS, HOUSING [0D9] (1 Of 2) -- (A3 SEDAN)) >> 34 Controls, Housing >> Transmission Fluid Circuit >> Transmission Fluid Cooler, Removing And Installing >> Installing

Transmission Fluid Cooler, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Replace the transmission fluid cooler bolts.

-- Replace the O-rings.

-- Check the transmission fluid level. Refer to TRANSMISSION FLUID LEVEL, CHECKING .

-- Checking coolant level. Refer to COOLANT, DRAINING AND FILLING [For engine(s) CNSB, CNTC] .

scientia non olet · About LEMON Manuals