Special Tools
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pry Lever: 80-200
- Transmission Support: 3282
- Transmission Support - Pins 29: 3282/29
- Transmission Support - Mounting Plate 42A: 3282/42A
- Engine Bung Set: VAS6122
- Engine and Gearbox Jack: VAS6931
Special tools and workshop equipment required
- Holding Plate: VW309A
- Holding Fixture: VW313 or
- Engine and Gearbox Bracket: VAS6095A
- Transmission Support: VW353
- Holding Fixture: VW540
Special tools and workshop equipment required
- Used Oil Collection and Extraction Unit: SMN372500
- Wrench - Pump/Injector Long Reach: T10054
- Socket And Extended Bit: T10107A
- Wedge Set: T10383
- Locking Button Removal Tool: T40203
- Shop Crane: VAS6100
- Oil Filler: VAS6262A
- Engine Support Bridge - Additional Hooks (2 pc.): 10-222A/2
- Engine/Gearbox Support Shackle (2 pc.): 10-222A/12
- Engine Support Bridge - Special Hook (2 pc.): 10-222A/20
- Engine Sling - Engine Bracket: 2024A/1
- Hose Clamps - Up To 25mm: 3094
- Engine Support Device: 3300A
- Trim Removal Wedge: 3409
- Vehicle Diagnostic Tester