Selector Lever Handle, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Press the parking brake button to activate the electro-mechanical parking brake.
-- Move the selector lever into "D/S".
-- Turn off the ignition.
Audi TT:
-- Unclip the selector lever boot on both sides using the : 3409 in direction of -arrows- and fold it upward.
Audi A3, Q2:
-- Carefully pry out the selector lever boot with the Wedge Set : T10383/1 on both sides -arrows- and then fold it upward.
All Vehicles:
-- Turn the locking ring all the way in the direction of -arrow A-.
- The tab -1- on the locking ring is offset to the tab -2- on the selector lever handle.
-- Remove the selector lever handle -1- upward with the selector lever boot in direction of -arrow A- without touching the locking button -2-.