Installing The Bonded Rubber Bushing
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Position the bonded rubber bushing on the trailing arm so that the marked line -arrows- is between the raised areas -1-.
NOTE:
Make absolutely sure that the bonded rubber bushing is in the correct installation position in relation to the trailing arm socket.
-- Mount the tools as illustrated.
- :VW412
- :T10496
- Bonded Rubber Bushing
- Trailing Arm
- :3345
- :VW402
-- Install the bonded rubber bushing.
-- Attach the trailing arm to the mounting bracket. Refer to REMOVING .
-- Install trailing arm with mounting bracket. Refer to TRAILING ARM WITH MOUNTING BRACKET, REMOVING AND INSTALLING .