LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> RS 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Rear Suspension -- (A3 Cabriolet / Sedan)) >> 42 Rear Suspension >> Wheel Bearing And Trailing Arm >> Overview - Trailing Arm >> Bonded Rubber Bushing Installed Position:

Bonded Rubber Bushing Installed Position:

WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Position the bonded rubber bushing on the trailing arm so that the marked line -arrows- is between the raised areas -1-.

GWWN42-10503Courtesy of AUDI OF AMERICA, LLC
NOTE:

Make absolutely sure that the bonded rubber bushing is in the correct installation position in relation to the trailing arm socket.

scientia non olet · About LEMON Manuals