LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> RS 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Rear Suspension -- (A3 Cabriolet / Sedan)) >> 42 Rear Suspension >> Stabilizer Bar >> Stabilizer Bar, Removing And Installing >> Stabilizer Bar, Removing And Installing, Multi-Link Suspension Vehicles With Front Wheel Drive >> Installing

Stabilizer Bar, Removing And Installing, Multi-Link Suspension Vehicles With Front Wheel Drive: Installing

WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Installation Is Reverse Of Removal, Noting The Following: 

-- Evenly tighten the bolts -arrows- for the stabilizer bar -1- to the subframe -2-.

GWWN42-10639Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals