Drive Axle With 90 Mm Outer CV Joint, Servicing: Notes
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Press Plate :VW401
- Press Plate :VW402
- Press Piece - Rod :VW408A
- Press Piece - Rod :VW411
- Press Piece - 37mm :VW416B
- Press Piece - Multiple Use :VW447H
- Circlip Pliers :VW161A
- Torque Wrench 1331 5-50 Nm :VAG1331
- Torque Wrench 1332 40-200 Nm :VAG1332
- Clamping Pliers :VAG1682A
- Tripod Joint Tool :T10065
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Plate Spring - Outer CV Joint to Drive Axle
- Locking Ring - Inner CV Joint
- Clamp - Protective Boot for Inner CV Joint to Drive Axle
- Bolts - Locking Plate to Protective Boot for Inner CV Joint
- Clamp - CV Boot to Outer CV Joint
- Clamp - CV Boot to Drive Axle
- Bolt - Outer CV Joint to Drive Axle