Tie Rod, Removing And Installing: Installing

WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Installation Is Reverse Of Removal, Noting The Following:

Tie rod connections may only be carried out of dimension between wheel hub center and lower edge of wheel housing, measured before assembly, is achieved WHEEL BEARING IN CURB WEIGHT, LIFTING VEHICLES WITH COIL SPRING .

-- An axle alignment may be required. Refer to EVALUATING NEED FOR AXLE ALIGNMENT .