Guidelines For Clean Working Conditions
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Thoroughly clean connection points and their surrounding areas with engine or brake cleaner before loosening and allow the cleaned connection points to dry completely.
- Clean the transmission and transmission components using Cleaning Solution :D 009 401 04 .
- Use lint-free cloths for cleaning, for example, the "WYPALL X70/WORKHORSE" cloth made by Kimberly-Clark Professional.
- Seal all open lines and connections immediately with clean plugs or caps from the Engine Bung Set :VAS6122 .
- Place the removed parts on a clean surface and cover them. Use foils and paper. Use a lint-free cloth!
- Carefully cover or seal opened components if the repair will not be done immediately.
- Only install clean parts: Remove the replacement parts from their packaging just before installing them.
- Protect the disconnected connectors from dirt and moisture and only connect when they are dry.