LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> RS 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Passenger Protection, Airbags, Seat Belts -- (Cabriolet)) >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belts >> Front Seat Belt Latch, Removing And Installing >> Installing

Front Seat Belt Latch, Removing And Installing: Installing

WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
GWWA69-10856Courtesy of AUDI OF AMERICA, LLC

Install In Reverse Order Of Removal. Note The Following: 

-- Position the seat belt latch -2- so that the cut-out -arrow B- lines up with the hole -arrow A- on the seat pan -1-.

WARNING:
  • Follow all pyrotechnic components safety precautions, refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
  • Observe all measures when installing the front seat, refer to FRONT SEAT, REMOVING AND INSTALLING .
scientia non olet · About LEMON Manuals