Front Belt End Fitting, Removing And Installing: Removing
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the sill panel strip, refer to SILL PANEL STRIP, REMOVING AND INSTALLING .
-- Move the front seat all the way forward/up.
-- Pry off the cap -1- using the Trim Removal Wedge :3409 -arrow A-, disengage the belt anchor -arrow B- and remove.
-- Remove the bolts -1 and 3-.
-- Remove the bolt with the belt anchor -4- and the stop sleeves.
-- Remove the belt anchor from the belt loop -2-.