Airbag Connector, Replacing: Installing
WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Follow all pyrotechnic components safety precautions, refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Connect the connector -1- to the airbag igniter -arrow A-.
-- Install the connector locking mechanism -2- -arrow B-. While doing this, the connector is pushed into the airbag igniter and locks into place.
The rest of the installation is performed in reverse order of removal, noting the following:
NOTE:
Make sure the connectors are installed correctly and are secure.