Seat Heating Element -Z6- / -Z8-, Removing And Installing, Sport Seat: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi A3 Quattro, 2016 Audi A3, and 2015 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Cover and cushion, separating, refer to LOWER SEAT FRAME COVER AND CUSHION, SEPARATING, SPORT SEAT .

Fabric Cover

Courtesy of AUDI OF AMERICA, LLC

-- Cut the wire -4- directly from the old heating element -3-.

NOTE:

The old heating elements remain on the cushion -1 and 2- and will be covered over by the new heating elements.

-- Align the new heating elements on the cushion.

-- Remove protective films from the heating elements in succession, taking care not to damage the heating elements.

-- Bond heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connecting wires to the individual heating elements in the base of the gaps.

Leather Cover