LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> RS 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Seat Upholstery, Covers -- (A3 Cabriolet)) >> 74 Seat Upholstery, Covers >> Front Seat Covers And Cushions >> Backrest Cover And Cushion, Removing And Installing >> Installing

Backrest Cover And Cushion, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi A3 Quattro, 2016 Audi A3, and 2015 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA69-10872Courtesy of AUDI OF AMERICA, LLC
WARNING:
  • Follow all pyrotechnic components safety precautions, refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
  • Observe all measures when installing the front seat, refer to FRONT SEAT, REMOVING AND INSTALLING .

Install in reverse order of removal. Note the following:

-- Place the side airbag -2- if necessary in the pocket sewn into the cover -1-, engage in the backrest frame and secure.

scientia non olet · About LEMON Manuals