LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> Q3 Premium Plus >> Repair and Diagnosis >> Maintenance >> Procedures >> Fluid Capacity Tables (2018) >> Fluid Capacity Tables >> Model Year: 2018

Model Year: 2018

CAUTION:

All quantities are approximate. Always refer to the Repair Information and/or the Maintenance Procedures for correct filling instructions.

Part numbers are for reference only. Always check with your parts department for the latest information.

*Funnels or aftermarket-Speed filling devices are not allowed when filling the engine with oil.

Component/System Capacity Part Number/Specification
2.0L Engine (CCTA)
  Oil and Filter Change 4.5L (4.8 qt.) VW 502 00
Coolant 10.0L (10.5 qt.) Refer to Parts Information
6-Speed Tiptronic Transmission (09M)
  Initial Fill 7.0L (7.4 qt) Refer to Parts Information
Bevel Box 0.9L (1.0 qt.) Refer to Parts Information
AWD Clutch - Initial 0.85L (0.9 qt.) Refer to Parts Information
AWD Clutch - Refill 0.7L (0.7 qt.)
Rear Final Drive 0.95L (1.0 qt.) Refer to Parts Information
Brake System
  Brake Fluid 1.0L (1.1 qt.) Refer to Parts Information
A/C System
NOTE: 2018 MY vehicles produced during 2017 may now be equipped with R1234yf instead of R134a. Be sure to carefully check your vehicle refrigerant and PAG oil requirements. Refrigerant 520 +/- 15g (18.3 +/- 0.5 oz.) R134a
Refrigerant 530 +/- 15g (18.7 +/- 0.5 oz.) R1234yf
Oil for Refrigerant Compressor 110 +/- 10 cc (3.7 +/- 0.3 fl. oz.) Refer to Parts Information
Window/Headlamp Washer System
  Washer Fluid 4.5L (4.8 qt.) Refer to Parts Information