Overview - Charge Air Hose Connections: Notes
WARNING: This page is about a different car, the 2016 Audi Q3 Quattro, 2016 Audi Q3, 2015 Audi Q3 Quattro, and 2015 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
With Hose Clamps
NOTE:
The hose connections as well as the air guide pipes and hoses must be free of oil and grease before installing.
Secure all hose connections with hose clamps of the same type as those equipped by the factory. Refer to the parts information.
In order to be able to securely mount the air guide hoses on their connectors, spray the screws on the previously used clamps with a rust remover.
Tightening specification for:
- Hose clamp -a- = 13 mm wide: 5.5 Nm
- Hose clamp -b- = 9 mm wide: 3 Nm
With Decoupling Element
CAUTION:
The seal could be damaged if the securing clip is in the locked position during installation. A damaged seal can leak.
- Follow the assembly instructions.