Part II

For Valvetrain, Engine With One Camshaft Adjusters - Part I. Refer to Part I .

Fig 1: Exploded View Of Valvetrain (Engine With One Camshaft Adjusters - Part II)

Courtesy of AUDI OF AMERICA, LLC

1. Cylinder Head
2. Ball Pin
   • For the engine cover
   • 9 Nm
3. O-ring
   • Always replace after removing
   • Coat with engine oil
4. Plugs
5. Oil Separator
   • Removing and installing. Refer to OIL SEPARATOR, REMOVING AND INSTALLING .
6. Bolt
   • Tightening specification and sequence. Refer to Fig 2.
7. Seal
   • Always replace after removing
8. Vacuum Pump
   • Overview. Refer to VACUUM SYSTEM .
9. Bolt
   • Tightening specification. Refer to VACUUM SYSTEM .
10. Seal
    • Always replace if damaged
11. O-ring
    • Always replace after removing
    • Coat with engine oil
12. Camshaft Position Sensor -G40-
    • Overview. Refer to OVERVIEW - IGNITION SYSTEM .
13. Bolt
    • Tightening specification -13- OVERVIEW - IGNITION SYSTEM => List Item:Bolt
14. Bolts
    • 9 Nm
15. Bracket
    • For EVAP Canister Purge Regulator Valve 1 -N80-

Fig 2: Oil Seperator Bolts Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC