Special Tools

Special tools and workshop equipment required 

• Puller - Unit Injector :T10055 

  Courtesy of AUDI OF AMERICA, LLC

• Locking Pin :T10060A 

  Courtesy of AUDI OF AMERICA, LLC

• Crankshaft Seal Installer Kit :T10122B  or Assembly Device:T10122C 

  Courtesy of AUDI OF AMERICA, LLC

• Seal Installer, Intermediate Shaft :T10356/1 

  Courtesy of AUDI OF AMERICA, LLC

• Counterhold - Vibration Damper :T10355 

  Courtesy of AUDI OF AMERICA, LLC

• Puller - Balancer Shaft :T10394 

  Courtesy of AUDI OF AMERICA, LLC

• Vibration Damper Assembly Tool :T10531 

  Courtesy of AUDI OF AMERICA, LLC

• Seal Installer - Sealing Flange Guide Sleeve :T20097 

  Courtesy of AUDI OF AMERICA, LLC

• Wrench - 21mm :T40263 

  Courtesy of AUDI OF AMERICA, LLC

• Adapter :T40314 

  Courtesy of AUDI OF AMERICA, LLC

• Dial Gauge - 0-10mm :VAS6079 

  Courtesy of AUDI OF AMERICA, LLC

• Internal Puller :VAS251605  (was Kukko 21/2)

  Courtesy of AUDI OF AMERICA, LLC

• Counter Support :VAS251621  (was Kukko 22/1)

  Courtesy of AUDI OF AMERICA, LLC

• Bearing Installer - Bearing Press Piece :VW207C 

  Courtesy of AUDI OF AMERICA, LLC

• Pilot Drift :VW222A 

  Courtesy of AUDI OF AMERICA, LLC

• Dial Gauge Holder :VW387 

  Courtesy of AUDI OF AMERICA, LLC

• Flywheel Lock Adapter :VW558 

  Courtesy of AUDI OF AMERICA, LLC

• Counterhold - Flywheel :10-201 

  Courtesy of AUDI OF AMERICA, LLC

• Flywheel Retainer :3067 

  Courtesy of AUDI OF AMERICA, LLC

• Not Illustrated:
• Piston Installation Sleeve :T40347 
• Torx Bit - T40 :T10545 
• Cylinder Dial Bore Gauge :VAS6078