Overview - Drive Plate

Fig 1: Drive Plate Exploded View

Courtesy of AUDI OF AMERICA, LLC

Cylinder Block
Transmission Side Sealing Flange
- Always replace after removing.
- With gasket
- Do not apply oil to the seal.
- Before installing, remove oil residue from crankshaft journal with a clean cloth.
- Removing and installing. Refer to SEALING FLANGE, REMOVING AND INSTALLING, TRANSMISSION SIDE .
Bolt
- Tightening sequence. Refer to Figure.
Drive Plate
- Allocation. Refer to the Parts Information .
- Drive plate installation position: >>collar<< faces the engine
- Removing and installing. Refer to DRIVE PLATE, REMOVING AND INSTALLING .
Bolt
- 60 Nm + 90°
- Always replace after removing.
Not Installed
Intermediate Plate
- The illustration does not show the version in the vehicle.
- Be careful not to damage or bend when installing
- Installing. Refer to Figure.
Alignment Sleeve