Balance Shaft, Removing And Installing, Intake Side: Removing

-- Remove the coolant pump toothed belt. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .

-- Remove the balance shaft drive chain. Refer to BALANCE SHAFT DRIVE CHAIN, REMOVING AND INSTALLING .

-- Remove the bolt -2- and then remove the drive wheel -1- for the coolant pump toothed belt.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the intermediate sprocket -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the mounting pin -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2- on the intake camshaft balance shaft.

Courtesy of AUDI OF AMERICA, LLC

-- Insert the : T10394/1  from the :T10394  and turn upward in the direction of the arrow.

Courtesy of AUDI OF AMERICA, LLC

-- Insert the :T10394  and push the sliding sleeve in the direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Install the :T10055  into the :T10394  and remove the balance shaft in the direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC