LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Intuitive Parking Assist System (Diagnostics) (Introduction)) >> Intuitive Parking Assist System >> DTC Check / Clear [08/2013 - ] >> DTC Check / Clear [08/2013 - ]

DTC Check / Clear [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the clearance sonar main switch on.
    4. Turn the Techstream on.
    5. Enter the following menus: Body Electrical / Intuitive P/A / Trouble Codes.
    6. Check for DTCs. Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2013 - ] .
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the clearance sonar main switch on.
    4. Turn the Techstream on.
    5. Enter the following menus: Body Electrical / Intuitive P/A / Trouble Codes.
    6. Clear the DTCs.
scientia non olet · About LEMON Manuals