LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2018 >> A6 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Steering Column (Service Information)) >> Tilt And Telescopic Manual Switch >> Installation [08/2013 - ] >> Installation [08/2013 - ]

Installation [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL TILT AND TELESCOPIC SWITCH 
    1. Engage the claw to install the tilt and telescopic switch.
    2. Connect the connectors.
  2. INSTALL LOWER STEERING COLUMN COVER  See step  9
  3. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD 
  4. INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY  . Refer to INSTALLATION [08/2013 - ] - Step 6
  5. INSTALL STEERING WHEEL ASSEMBLY  See step  9
  6. INSTALL HORN BUTTON ASSEMBLY 

    Refer to INSTALLATION [08/2013 - ]

scientia non olet · About LEMON Manuals