Valve Stem Seals, Removing And Installing, Cylinder Removed: Assembling
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Assembly is performed in the reverse order of disassembly, noting the following:
-- Make sure all the roller rocker levers lie on the ends of the valve stems correctly and are clipped onto the respective hydraulic adjusting elements.
-- Install the camshafts. Refer to CAMSHAFT, REMOVING AND INSTALLING .