Cylinder Head Bank 2 (Left), Removing: Notes
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Engine Support Bridge :10-222A
- Engine Support - Bracket w/Spindle and Hook :10-222A/10
- Engine Crane Adapter - Bracket :T10013
- Threaded pin of Engine Support Bracket :T10338
- Engine Support - Basic Set :T40091
- Engine Support - Supplement Kit :T40093A with :T40093/7 , and :T40093/8
- Commercially available XZN M12 socket, minimum 75 mm long
- Sealant. Refer to the parts information.
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Cylinder Head to Cylinder Block
- O-ring - Front Coolant Pipe to Cylinder Head
- Cylinder Head Gasket - Cylinder Head to Cylinder Block