Left cylinder head:

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front left wheel. Refer to WHEELS AND TIRES .

-- Remove the left driveshaft cover -1- in the wheel housing.

-- Remove the bolt -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the union nut -left arrow- and then remove the high pressure line -1-.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore -right arrow-.

-- Loosen the clamp -1- and remove the coolant hose.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore -item 2-.

-- Remove the bolts -3 and 4- and the Union nut -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the coolant line from the cylinder block, and slide it slightly forward.

NOTE:

Ignore -item 1-.

-- Loosen the clamp -arrow- and remove it.

Courtesy of AUDI OF AMERICA, LLC