Ribbed Belt, Removing And Installing, Supercharger Ribbed Belt: Installing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Install In Reverse Order Of Removal. Note The Following:

-- Place the ribbed belt over the pulley as illustrated.

Tensioner
Supercharger
Idler Roller
Vibration Damper

-- Lastly, place the ribbed belt on the idler roller -3-.

NOTE:

When Installing The Ribbed Belt, Make Sure It Is Seated Correctly On The Pulleys.

-- Start the engine and check the belt routing.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .