Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left front wheel spoiler. Refer to WHEEL HOUSING LINER .

-- Disconnect the connector -3-.

-- Remove the nut -2- and the retaining bracket.

NOTE:

Place a cloth underneath to catch any escaping coolant.

-- Disconnect the coolant hose from the Charge Air Cooling Pump -V188- with the :3094 .

-- Loosen the hose clamps -1-, remove the coolant hoses and then remove the charge air cooling pump.