Coolant Fan -V7- /Coolant Fan 2 -V177-, REMOVING AND INSTALLING, VERSION 1: Removing

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

When installing, bring all cable ties back to same positions.

-- Remove the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING, AUDI A7 .

-- Disconnect the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the left Coolant Fan -V7-.

-- Disconnect the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the right Coolant Fan 2 -V177-.