Overview - Electrical Coolant Pump, AUDI S6/S7 [CEUC, CRDB, CEUD, CWUB, CTGE]
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 1.5 Nm
- Spacer Sleeve
- Grommet
- Bracket
- For After-Run Coolant Pump -V51-
- After-Run Coolant Pump -V51-
- Removing and installing. Refer to After-Run Coolant Pump -V51-, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Bracket
- Nut
- 9 Nm
- Nut
- 9 Nm
- Bolt
- 9 Nm
- Retaining Bracket
- Nut
- 9 Nm
- Charge Air Cooling Pump -V188-
- Removing and installing. Refer to Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING .
- After-Run Coolant Pump -V51-
- Removing and installing. Refer to After-Run Coolant Pump -V51-, REMOVING AND INSTALLING .
- Bolt
- 1.5 Nm
- Spacer Sleeve
- Grommet
- Bracket
- Nut
- 9 Nm
- Retaining Bracket
- Charge Air Cooling Pump -V188-
- Removing and installing. Refer to Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING .
- Coolant Pipe
- Nut
- 9 Nm
- Nut
- 9 Nm
- Coolant Pipe