Removal And Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

1.

Remove the screw and the interior door handle trim bezel.

2.

Release the door handle retaining clip and position the interior door handle aside.

GFD137842

Courtesy of FORD MOTOR COMPANY

3.

Release the interior door handle actuating cable from the interior door handle.

4.

NOTE: Make sure the interior door handle spring is realigned before installation of the door handle. Check for normal operation.

To install, reverse the removal procedure.