Removal And Installation
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Relieve tension on the parking brake cable system. For additional information, refer to Parking Brake Cable Tension Release .
- 2.
Remove the front door scuff plate. For additional information, refer to Interior Trim - Exploded View in Interior Trim and Ornamentation .
- 3.
Remove the instrument panel steering column opening trim panel and if equipped, the instrument panel lower cover. For additional information, refer to Instrument Panel - Exploded View in Instrument Panel and Console .
- 5.
Remove the retainer and the cowl trim panel. For additional information, refer to Interior Trim - Exploded View in Interior Trim and Ornamentation .
- 6.
Compress the 2 tabs and disconnect the parking brake release cable from the parking brake control assembly.
- 7.
Disconnect the parking brake release cable from the release lever and remove the parking brake release handle.
- 12.
Compress the 2 tabs, disconnect the parking brake cable from the control assembly and remove the control assembly.